Part of machine Okuma | Repairs Precision Zone

The Precision Zone Team are the Experts in Okuma Power Supply Repairs

Precision Zone specializes in repair services for a wide range of Okuma industrial electronics. This expertise extends to the repair of Okuma Power Supply Modules.

All power supply repairs are done on-site repair facility. Our expert repair team of engineers and technicians have decades of industry experience and superior technical knowledge to ensure that all of your repairs are done at the highest quality.

Precision Zone Fanuc Power Supply Repair Benefits

Quick and Flexible Service
Complete Simulation and Product Testing
Fully Refurbished, Not Just Repaired
12-Month Warranty
Rush Repair Options

Recently Repaired Products

MPR12-BU1 is an
Part of machine manufactured by Okuma
Discovered issues: Bad Hybrid IC’s, Leaky Capacitors (Open, Corroded Traces)

E0451-521-016 is an
Part of machine manufactured by Okuma
Discovered issues: Bad Hybrid IC’s, Bad Input Section, Open Resistor(s) Description: OPUS 5000, power supply 5000T

MPS30 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Bad Input Section, Leaky Capacitors (Open, Corroded Traces), May Require Board Replacement
Type: DC power supply unit
Regeneration method: Power regeneration type
Unit capacity: 30kW
Unit generation: First generation

ETU-3MK01Z is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Input Section, Bad Output Section, Leaky Capacitors (Open, Corroded Traces)

PSU-20-ACL is an
Part of machine manufactured by Okuma
Discovered issues: Bad Hybrid IC’s, Multiple signs of previous repair, Physical Damage

MPS45 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Bad Input Section
Type: DC power supply unit
Regeneration method: Power regeneration type
Unit capacity: 45kW
Unit generation: First generation

MPS45A is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Bad Input Section
Type: DC power supply unit
Regeneration method: Power regeneration type
Unit capacity: 45kW
Unit generation: Second generation (2004 or later)

E0451-521-029 is an
Part of machine manufactured by Okuma
Discovered issues: Bad Input Section, Bad Output Section, Leaky Capacitors (Open, Corroded Traces), Open Resistor(s)

MPS20 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Leaky Capacitors (Open, Corroded Traces)
Type: DC power supply unit
Regeneration method: Power regeneration type
Unit capacity: 20kW
Unit generation: First generation

MPS60 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Bad Input Section, Leaky Capacitors (Open, Corroded Traces)
Type: DC power supply unit
Regeneration method: Power regeneration type
Unit capacity: 60kW
Unit generation: First generation

MPR5 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Leaky Capacitors (Open, Corroded Traces), Multiple signs of previous repair
Type: DC power supply unit
Regeneration method: Resistor regeneration type
Unit capacity: 5kW
Unit generation: First generation

E0215-541-002 is an
Part of machine manufactured by Okuma
Discovered issues: Failure Info Required for Further Evaluation, Leaky Capacitors (Open, Corroded Traces), Multiple signs of previous repair, Non-supported product - Cannot Test

MPS10 is an
Part of machine manufactured by Okuma
Discovered issues: Bad Hybrid IC’s
Type: DC power supply unit
Regeneration method: Power regeneration type
Unit capacity: 10kW
Unit generation: First generation

EXP126-0A is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Input Section, Bad Output Section, Leaky Capacitors (Open, Corroded Traces)

MPS60B is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Hybrid IC’s, Bad Output Section, Physical Damage

MPR10 is an
Part of machine manufactured by Okuma
Discovered issues: Bad Hybrid IC’s, Bad Input Section, Leaky Capacitors (Open, Corroded Traces)
Type: DC power supply unit
Regeneration method: Resistor regeneration type
Unit capacity: 10kW
Unit generation: First generation

E0451-521-094 is an
Part of machine manufactured by Okuma
Discovered issues: Bad Output Section, Leaky Capacitors (Open, Corroded Traces)

E0451-521-038 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Input Section, Bad Output Section, Leaky Capacitors (Open, Corroded Traces), Open Resistor(s) Description: CPU Power supply, 5000 GHP (10 watts), +5V, +12V, +24V, ISO24V

DC-S1A-2 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), Bad Regeneration Circuit, Physical Damage
Model Number: DC-S1A
Number of Axes (Part #): 2 (E0451-596-002)

E0451-521-037 is an
Part of machine manufactured by Okuma
Discovered issues: Bad Fuse, Bad Hybrid IC’s, Bad Input Section, Bad Output Section, Leaky Capacitors (Open, Corroded Traces) Description: OPUS 5000 GLP

DCPS-1-3 is an
Part of machine manufactured by Okuma
Discovered issues: Bad DC Bus Capacitor(s), May Require Board Replacement, Physical Damage

MPS30B is an
Part of machine manufactured by Okuma
Discovered issues: Bad Input Section, Bad Output Section

E0451-680-004 is an
Part of machine manufactured by Okuma
Discovered issues: May Require Board Replacement, Bad Output Section, Leaky Capacitors (Open, Corroded Traces)

MPS45B is an
Part of machine manufactured by Okuma
Discovered issues: Bad Hybrid IC’s, Bad Output Section